Orange Pi Plus 2E

Add to comparison | Report mistake

  Manufacturer: XunLong Software
  Official website: Visit (new tab)
  Category:  Single board computer

Rate this board

Product Description

Orange Pi Plus 2E is one of the most powerful boards on the market for its price. It features a 1.6GHz AllWinner H3 SoC, 2GB RAM, 16GB Samsung eMMC, a built-in Wi-Fi module (RTL8189ETV) and a Raspberry Pi compatible GPIO header. In addition to its technical specifications, what makes this board interesting is that it was designed based on requests by the developers of Armbian, a Debian-based Linux distro for single-board computers.

Product Specifications

Manufacturer: XunLong Software
SoC: AllWinner H3
CPU: ARM Cortex-A7 (32-bit)
1.6GHz quad core
GPU (graphics): Mali-400 MP2
MCU (real-time):
FPGA (gates):
NPU (neural):
Size 2GB
Built-in / External:   Built-in
Type (e.g. DDR3): DDR3
Speed: ?
ECC (error correcting) RAM:
Internal storage:
Size 16GB
Built-in / optional:   Built-in
Type: ?
eMMC slots:
SD card MicroSD card slot, up to 64GB
USB host ports 3 USB ports
Type: 2.0
USB OTG ports
SATA interfaces
Ethernet interfaces 1 port
Type: Gigabit
Wake-on-LAN    Not supported
HDMI 1 port
Version: ?
Max. resolution: ?
Audio support:
Composite video (CVBS) 1 port
Display interfaces (LVDS, DSI...)
Camera interfaces (CSI, DVP...)   CSI (x1)
Audio output
Analog I/O: 1x (via 3.5mm jack)
Via HDMI:   Supported
Audio input
Line input:
Mic input:
Onboard mic: (1 mic)
IR receiver
Wireless connectivity
WiFi: 802.11 b/g/n
Mobile broadband:
Other I/O
GPIO: x40
PWM: x1
SPI: x1
I2C: x1
UART: x1
Arduino shield support    Not compatible.
Raspberry Pi shield support    Compatible pin header
96boards compliance    None
Real time clock (RTC)
Other features
Raspberry Pi compatible pinout
Size 108mm x 67mm x 15mm
Weight 52g
Power Input voltage: 5V
Power consumption: 1A - 3A
PMIC/PMU (pwr mgmt unit) ?
Lithium battery support ?
Operating temperature ?
Price: (might vary over time)
Android support    Android 4.4
Windows support    Not supported

Please note: assumes no responsibility or liability for errors or omissions in the contents of this page or any other part of this website. That said, we value your feedback and request that you email us regarding errors, omissions, or other suggestions to hackerboards [at] deviceguru [dot] com. Thanks!