NanoPi 2

Add to comparison | Suggest corrections

  Manufacturer:  FriendlyElec
  Official website:  Visit
  Category:  Single board computer
  Further info:  automated Google search

Rate this board

Product Description

The NanoPi2 is a newly released ARM board by FriendlyARM which advances the NanoPi by featuring Samsung’s S5P4418 Quad Core [email protected] processor, 1G 32bit DDR3 RAM, rich video and display interfaces and two MicroSD slots. Its Quad Core [email protected] processor and 1G RAM make Linux and Android booted from a TF card fast and smoothly. Its adoption of the Raspberry Pi's GPIO pin header makes it compatible with both Raspberry Pi's external GPIO modules and Arduino’s shield boards. Its two MicroSD slots make it support up to two external TF cards' storage. Its video and display interfaces include a DVP camera interface, an HDMI interface and an LCD interface which make it work with various popular display devices. The NanoPi2's on-board AP6212 Wireless and Bluetooth chip supports 802.11 b/g/n, AP mode, BLE 4.0 and HS mode.

On the NanoPi2’s wiki FriendlyARM open sources its schematics, PCB, bootloader, kernel and file systems, and provides plenty of tutorials and code samples.

Product Specifications

Manufacturer FriendlyElec
SoC Samsung S5P4418
Primary processor
ARM Cortex-A9 (32-bit)
1.4GHz quad core
Secondary processors
GPU (graphics): Mali-400 MP
MCU (real-time):
FPGA (gates):
Other (DSP, FPU, NPU, TPU, AI...):
Size: 1GB
Built-in / external:   Built-in
Type (e.g. DDR3): ?
Speed: ?
ECC support:
Internal storage
Built-in / optional:   Built-in
Type: ?
Removable storage MicroSD card slot
m.2 interface(s)
m.2 NVMe support
USB host ports 1x
Type: 2.0
USB OTG ports
SATA interfaces
Ethernet interfaces
Wake-on-LAN    Not supported
HDMI ports 1x
Version: ?
Max. resolution: ?
Audio support:
Composite video (CVBS)
Other display interfaces
  0.5 mm spacing 45 pin interface
Camera interfaces (CSI, DVP...)   1x
Type: CSI
Audio output
Analog outputs:
Via HDMI:   Supported
Audio input
Line inputs:
Mic inputs:
Onboard mic:
IR receiver
Wireless connectivity
WiFi: 802.11 b/g/n (AP6212)
Bluetooth: 4.0
Other I/O
GPIO: 40x
PWM: 3x
SPI: 2x
I2C: 2x
UART: 3x
RS232 (or 485 or 422):
Arduino shield support    No
Raspberry Pi shield support    No
96boards compliance    None
Real time clock (RTC)
Other features
2x MicroSD card slots
Size 75 x 40 x 10mm
Weight 22g
Power Input voltage: 5V
Input current: 1A - 2A
(power management controllers)
Lithium battery support ?
Operating temperature ?
Price (USD)
(Note: likely to vary)
Linux support    yes
Android support    Android 4.4.2
Supported Windows OSes
   Not supported (or unknown)
Other supported OSes
   Not supported (or unknown)