NanoPi A64

Add to comparison | Report mistake

  Model:  nanopi-a64
  Manufacturer:  FriendlyElec
  Official website:  Visit (new tab)
  Category: Single board computer

Rate this board

Product Description

Official description:

The NanoPi A64 is a new board of high performance with low cost designed by FriendlyElec. It uses Allwinner’s 64-bit A64 quad-core SoC(ARM Cortex-A53). FriendlyElec has made a UbuntuCore and a UbuntuMATE image files for it.

The NanoPi A64 is a small board with comprehensive interfaces, ports and features. It has Ethernet, IR receiver, Video/Audio input and output. It has onboard AXP803 PMU and WiFi. It takes power input from its MicroUSB port. It has MIPI-DSI and DVP interfaces, GPIO pin-header compatible with Raspberry Pi and a serial debug port.

Product Specifications

Manufacturer FriendlyElec
SoC AllWinner A64
CPU ARM Cortex-A53 (64-bit)
1.152GHz quad core
GPU (graphics): Mali-400 MP2
MCU (real-time):
FPGA (gates):
NPU (neural):
Size: 1GB
Built-in / external:   Built-in
Type (e.g. DDR3): DDR3
Speed: ?
ECC support:
Internal storage
Built-in / optional:   Built-in
Type: ?
eMMC slots
SD card MicroSD card slot, up to 64GB
USB host ports 2 USB ports
Type: 2.0
USB OTG ports
SATA interfaces
Ethernet interfaces 1 port
Type: Gigabit
Wake-on-LAN    Not supported
HDMI 1 port
Version: ?
Max. resolution: ?
Audio support:
Composite video (CVBS)
Display interfaces (DSI, LVDS...)   MIPI DSI
Camera interfaces (CSI, DVP...)   1x DVP
Audio output
Analog outputs: 1x (via 3.5mm jack)
Via HDMI:   Supported
I2S: x1
Audio input
Line inputs:
Mic inputs: x1
Onboard mic:
IR receiver
Wireless connectivity
WiFi: 802.11 b/g/n
Other I/O
GPIO: x40
PWM: x1
SPI: x2
I2C: x3
UART: x3
RS232 (or 485 or 422):
Arduino shield support    Not compatible.
Raspberry Pi shield support    Compatible pin header
96boards compliance    None
Real time clock (RTC)
Other features
PMU: AXP803, supports software power-off
Serial Debug Port: 2.54mm pitch 4pin-header
DVP Camera: 0.5mm pitch 24pin FPC seat
MIPI DSI: 0.5mm pitch 30pin FPC seat
GPIO: 2.54mm pitch 40pin-header, compatible with Raspberry Pi.
I2S: 7pin, 2.54mm pitch
LED: Power Indication x 1, System LED x 1
Size 64mm x 60mm x 13mm
Weight ?
Power Input voltage: 5V
Power consumption: 1A - 2A
(power management controllers)
Lithium battery support ?
Operating temperature ?
(Note: likely to vary)
Linux support    yes
Android support    Not officially supported (supported by SoC)
Supported Windows OSes
   Not supported (or unknown)
Other supported OSes
   Not supported (or unknown)