Banana Pi M2M "Magic"

Add to comparison | Report mistake

  Model code: BPI-M2M
  Manufacturer: SinoVoip
  Official website: Visit (new tab)
  Category:  SBC / development boards

Product description:

Banana Pi M2M "Magic" is a compact single board computer by SinoVoip, mostly aimed at IoT applications. The board comes in different variants (AllWinner R16 or A33 SoC, 8/16/32/64GB internal flash storage), all powered by a quad-core ARM Cortex-A7 SoC and 512MB of RAM. Despite lacking HDMI and Ethernet interfaces, the board offers Wi-Fi b/g/n, Bluetooth 4.0 LE, LVDS and several other interfaces, and can also be powered by a 3.7V Lithium battery.



Rate this board
Quality:
Value
Performance
Reliability
Documentation
Community
Sorry, no stores were provided.

  • You can try Amazon or eBay for "mainstream" single board computers, or Aliexpress, Banggood and GearBest for China-based SBCs.
  • For industrial single board computers, you can try requesting a quote either on the official website or (sometimes) on Alibaba
  • You can also suggest a (possibly international) store using the "Report mistake" feature.












Filter table:
Manufacturer SinoVoip
SoC AllWinner R16 / A33
CPU ARM Cortex-A7 (32-bit)
1.2GHz quad core
Co-processing units
GPU (graphics): Mali-400 MP2
MCU (real-time):
FPGA (gates):
NPU (neural):
RAM
Size 512MB
Built-in / External:   Built-in
Type (e.g. DDR3): DDR3
Speed: ?
ECC (error correcting) RAM:
Internal storage
Size 64GB
Built-in / optional:   Built-in
Type: ?
eMMC slots
SD card MicroSD card slot, up to 64GB
USB host 1 USB ports
Type: 2.0
USB OTG
SATA
Ethernet
Wake-on-LAN    Not supported
HDMI
VGA
Composite video (CVBS)
Display interfaces (LVDS, DSI...)   MIPI DSI (LVDS via header)
Camera interfaces (CSI, DVP...)   CSI (x1)
Audio output
Analog output:
SPDIF:
I2S: x1
Audio input
Line input:
Mic input:
Onboard mic: (1 mic)
IR receiver
Wireless connectivity
WiFi: 802.11b/g/n 2.4GHz (AP6212)
Bluetooth: 4.0 BLE
Mobile broadband:
LoRa:
Other I/O
GPIO: x40
ADC:
PWM: x1
SPI: x1
I2C: x1
UART: x2
RS232:
Arduino shield support    Not compatible.
Raspberry Pi shield support    Not compatible.
96boards compliance    None
Real time clock (RTC)
Other interfaces
40-pin GPIO header
Display: MIPI Display Serial Interface (DSI) interface, 4 data lanes
Camera: CSI input, supports 8-bit YUV422 CMOS sensor interface, CCIR656 protocol for NTSC and PAL, 5Mpxl camera sensor, video capture up to [email protected]
Video decoder: multi-format FHD video decoding, including Mpeg1/2, Mpeg4, H.263, H.264, etc H.264 ([email protected])
Video encoder: H.264 ([email protected])
3.7V Lithium cell support
Size 51mm x 51mm x 11mm
Weight 40g
Power Input voltage: 3.7V - 5V
Power consumption: 1A - 2A
PMIC/PMU (power management) ?
Lithium battery support Supported
Operating temperature ?
Price (might vary over time)
$23
Android support    Not supported
Windows support    Not supported


Please note: HackerBoards.com assumes no responsibility or liability for errors or omissions in the contents of this page or any other part of this website. That said, we value your feedback and request that you email us regarding errors, omissions, or other suggestions to hackerboards [at] deviceguru [dot] com. Thanks!