Orange Pi Zero Plus 2 (H5)

Add to comparison | Suggest corrections

  Manufacturer:  XunLong Software
  Official website:  Visit
  Category:  Single board computer
  Further info:  automated Google search

Rate this board
Quality:
Value
Performance
Reliability
Documentation
Community
Sorry, no stores were provided.

  • You can try Amazon or eBay for "mainstream" single board computers, or Aliexpress, Banggood and GearBest for China-based SBCs.
  • For industrial single board computers, you can try requesting a quote either on the official website or (sometimes) on Alibaba
  • You can also suggest a (possibly international) store using the "Report mistake" feature.



Product Description

Orange Pi Zero Plus 2 (H5) is an upgrade to the original Orange Pi Zero, with several important differences.
The board is powered by an AllWinner H5 SoC (instead of H2+) clocked at 1.2GHz, with 512MB of RAM and 8GB of eMMC flash. It also features HDMI with CEC support, Wi-Fi 802.11 b/g/n and BLE 4.0 via the AP6212 module. Ethernet support has been dropped.


Product Specifications

Manufacturer XunLong Software
SoC AllWinner H5
CPU ARM Cortex-A53 (64-bit)
1.2GHz quad core
Coprocessors
GPU (graphics): Mali-450
MCU (real-time):
FPGA (gates):
NPU (neural):
RAM
Size: 512MB
Built-in / external:   Built-in
Type (e.g. DDR3): DDR3
Speed: ?
ECC support:
Internal storage
Size: 8GB
Built-in / optional:   Built-in
Type: eMMC
Removable storage MicroSD card slot
m.2 interface(s)
m.2 NVMe support
USB host ports 2x
Type: 2.0 (via pin header)
USB OTG ports
SATA interfaces
Ethernet interfaces
Wake-on-LAN    Not supported
HDMI ports 1x
Version: ?
Max. resolution: ?
Audio support:
Composite video (CVBS) 1 port
Other display interfaces
(DSI, LVDS, VGA...)
Camera interfaces (CSI, DVP...)   1x
Type: CSI
Audio output
Analog outputs: 1x (unknown port)
Via HDMI:   Supported
SPDIF:
I2S:
Audio input
Line inputs:
Mic inputs: 1x
Onboard mic:
IR receiver
Wireless connectivity
WiFi: 802.11 b/g/n
Bluetooth: 4.0 LE
Broadband:
LoRa:
Other I/O
GPIO: 26x
ADC:
PWM: 1x
SPI: 1x
I2C: 1x
UART: 1x
RS232 (or 485 or 422):
Arduino shield support    No
Raspberry Pi shield support    Compatible pin header
96boards compliance    None
Real time clock (RTC)
Other features
2x LEDs (power, status), Raspberry Pi B+ compatible (?) 26-pin header
Size 48 x 46 x 12mm
Weight 20g
Power Input voltage: 5V
Input current: 700mA - 2A
PMIC/PMU
(power management controllers)
?
Lithium battery support ?
Operating temperature -10 to 65°C
Price (USD)
(Note: likely to vary)
$20
Linux support    yes
Android support    Not supported (or unknown)
Supported Windows OSes
   Not supported (or unknown)
Other supported OSes
   Not supported (or unknown)