BeagleBone Blue

Add to comparison | Suggest corrections

  Official website:  Visit
  Category:  Single board computer
  Date added/updated:  2017/05/18
  Further info:  automated Google search

Rate this board
Sorry, no stores were provided.

  • You can try Amazon or eBay for "mainstream" single board computers, or Aliexpress, Banggood and GearBest for China-based SBCs.
  • For industrial single board computers, you can try requesting a quote either on the official website or (sometimes) on Alibaba
  • You can also suggest a (possibly international) store using the "Report mistake" feature.

Product Description

No description provided.

Product Specifications

SoC TI Sitara AM3358
CPU ARM Cortex-A8 (32-bit)
1GHz single core
GPU (graphics): PowerVR SGX530 w/ NEON
MCU (real-time):
FPGA (gates):
NPU (neural):
Size: 512MB
Built-in / external:   Built-in
Type (e.g. DDR3): ?
Speed: ?
ECC support:
Internal storage
Size: 4GB
Built-in / optional:   Built-in
Type: ?
Removable storage MicroSD card slot
m.2 interface(s)
m.2 NVMe support
USB host ports 1x
Type: 2.0 (host + client)
USB OTG ports
SATA interfaces
Ethernet interfaces
Wake-on-LAN    Not supported
HDMI ports
Composite video (CVBS)
Other display interfaces
Camera interfaces (CSI, DVP...)
Audio output
Analog outputs:
Audio input
Line inputs:
Mic inputs:
Onboard mic:
IR receiver
Wireless connectivity
WiFi: 802.11 b/g/n (TI WiLink 8)
Bluetooth: BLE 4.1
Other I/O
GPIO: 8x
ADC: 4x
SPI: 2x
I2C: 1x
UART: 4x
RS232 (or 485 or 422):
Arduino shield support    No
Raspberry Pi shield support    No
96boards compliance    None
Real time clock (RTC)
Other features
From official datasheet:

SiP (System-in-Package): Octavo Systems OSD3358
2x PRU 32-bit 200MHz microcontrollers
Software Compatibility: Debian, Ardupilot, ROS, Cloud9 IDE on Node.js w/ BoneScript library
WiLink 1835 WiFi 802.11 b/g/n 2.4GHz (2x2 MIMO, AP, SmartConfig, STA, Wi-Fi Direct, Mesh over Wi-Fi based on 802.11s)
Bluetooth 4.1 with BLE

CAN available via 4 pin JST-SH connector (includes TCAN1051 CAN transceiver)

6VDC 4A regulator to drive servo motor outputs
Debug Support: JTAG test points

2 user configurable buttons (MOD, PAU)
11 user configurable LEDs (USR0-3, Red, Green, WIFI, Battery 0-3)
LED; Power LED

Motor Control (requires power from either DC Jack or 2S battery):
4 DC motor drivers
4 Quadrature encoder inputs
8 Servo motor outputs

Sensors: 9 axis IMU, Barometer
Size ?
Weight ?
Power Input voltage: 5 - 18V
Input current: 700mA - 2A
(power management controllers)
Lithium battery support 2-cell Li-Po (7.4V) with balancing/charger circuit (JST-XH connector)
Operating temperature ?
Price (USD)
(Note: likely to vary)
Linux support    yes
Android support    Not supported (or unknown)
Supported Windows OSes
   Not supported (or unknown)
Other supported OSes
   Not supported (or unknown)
Certifications ROHS, CE, FCC