NanoPi Fire3
Add to comparison | Report mistake
Manufacturer: FriendlyElec
Official website: Visit (new tab)
Category: SBC / development boards
Date added: 2017/11/12
Product description:
Official website: Visit (new tab)
Category: SBC / development boards
Date added: 2017/11/12
Product description:
The NanoPi Fire3 is a high performance ARM Board developed by FriendlyElec for Hobbyists, Makers and Hackers for IOT projects. It features Samsung's Cortex-A53 Octa Core [email protected] SoC and 1GB 32bit DDR3 RAM. It has a Gbps Ethernet port. It boots Android and Debian from a TF card. It integrates an HDMI and LCD interface. Its adoption of the Raspberry Pi's GPIO pin header makes it compatible with both Raspberry Pi's external GPIO modules and Arduino's shield boards. Its PCB dimension is 75 x 40 mm.
Source: wiki.friendlyarm.com
Rate this board
| Quality: | |
| Value | |
| Performance | |
| Reliability | |
| Documentation | |
| Community |
Sorry, no stores were provided.
- You can try Amazon or eBay for "mainstream" single board computers, or Aliexpress, Banggood and GearBest for China-based SBCs.
- For industrial single board computers, you can try requesting a quote either on the official website or (sometimes) on Alibaba
- You can also suggest a (possibly international) store using the "Report mistake" feature.
| Filter table: | |||||||||||||||
| Manufacturer | FriendlyElec | ||||||||||||||
| SoC | Samsung S5P6818 | ||||||||||||||
| CPU |
ARM Cortex-A53 (64-bit) 1.4GHz octa core |
||||||||||||||
| Co-processing units |
|
||||||||||||||
| RAM |
|
||||||||||||||
| Internal storage |
|
||||||||||||||
| eMMC slots | |||||||||||||||
| SD card | MicroSD card slot, up to 64GB | ||||||||||||||
| USB host |
1 USB ports Type: 2.0 |
||||||||||||||
| USB OTG | |||||||||||||||
| SATA | |||||||||||||||
| Ethernet |
1 port Type: Gigabit |
||||||||||||||
| Wake-on-LAN | Not supported | ||||||||||||||
| HDMI |
1 port Version: 1.4a, microHDMI (type D) Max. resolution: 1080p @ 60fps Audio support: |
||||||||||||||
| VGA | |||||||||||||||
| Composite video (CVBS) | |||||||||||||||
| Display interfaces (LVDS, DSI...) | 0.5 mm pitch SMT FPC seat, for full-color LCD (RGB: 8-8-8) | ||||||||||||||
| Camera interfaces (CSI, DVP...) | DVP, 0.5mm spacing FPC socket. It includes ITU-R BT 601/656 8-bit, I2C, PWM and IO (x1) | ||||||||||||||
| Audio output |
|
||||||||||||||
| Audio input |
|
||||||||||||||
| IR receiver | |||||||||||||||
| Wireless connectivity |
|
||||||||||||||
| Other I/O |
|
||||||||||||||
| Arduino shield support | Not compatible. | ||||||||||||||
| Raspberry Pi shield support | Compatible pin header | ||||||||||||||
| 96boards compliance | None | ||||||||||||||
| Real time clock (RTC) | |||||||||||||||
| Other interfaces |
PMU Power Management: Implemented by a Cortex-M0 MCU, support software power-off, and RTC alarm power-up functions
Debug Serial Port/UART0 x 1 OS: FriendlyCore(Linux Kernel 4.4 + Qt5.9 + OpenGL2.0) and Debian Button: Power Button x 1, Reset Button x 1 |
||||||||||||||
| Size | 75mm x 40mm x 16mm | ||||||||||||||
| Weight | ? | ||||||||||||||
| Power |
Input voltage: 5V Power consumption: 1.1A - 2A |
||||||||||||||
| PMIC/PMU (power management) | ? | ||||||||||||||
| Lithium battery support | ? | ||||||||||||||
| Operating temperature | -20°C to 80°C | ||||||||||||||
|
Price (might vary over time) |
$35 | ||||||||||||||
| Android support | Android 5.1.1 | ||||||||||||||
| Windows support | Not supported | ||||||||||||||
Please note: HackerBoards.com assumes no responsibility or liability for errors or omissions in the contents of this page or any other part of this website. That said, we value your feedback and request that you email us regarding errors, omissions, or other suggestions to hackerboards [at] deviceguru [dot] com. Thanks!