Renegade 1GB

Add to comparison | Report mistake

  Model code: ROC-RK3328-CC
  Manufacturer: Libre Computer Board
  Official website: Visit (new tab)
  Category:  SBC / development boards
  Date added: 2017/12/05

Product description:

Libre Computer's "Renegade" is a Rockchip RK3328-based single board computer, with Raspberry Pi-like form factor and pin header compatibility. It features 1 up to 4GB RAM, an eMMC 5.x storage slot (8-128GB), HDMI 2.0 ([email protected]) and Gigabit Ethernet.

Rate this board
Sorry, no stores were provided.

  • You can try Amazon or eBay for "mainstream" single board computers, or Aliexpress, Banggood and GearBest for China-based SBCs.
  • For industrial single board computers, you can try requesting a quote either on the official website or (sometimes) on Alibaba
  • You can also suggest a (possibly international) store using the "Report mistake" feature.

Filter table:
Manufacturer Libre Computer Board
SoC Rockchip RK3328
CPU ARM Cortex-A53 (64-bit)
1.5GHz quad core
Co-processing units
GPU (graphics): Mali-450 MP2
MCU (real-time):
FPGA (gates):
NPU (neural):
Size 1GB
Built-in / External:   Built-in
Type (e.g. DDR3): DDR4
Speed: ?
ECC (error correcting) RAM:
Internal storage
Size 128GB
Built-in / optional:   Optional
Type: Optional, eMMC up to 128GB
eMMC slots   1x eMMC 5.x socket (8GB-128GB)
SD card MicroSD card slot, up to 64GB
USB host 3 USB ports
Type: 1x 3.0 + 2x 2.0
Ethernet 1 port
Type: Gigabit
Wake-on-LAN    Not supported
HDMI 1 port
Version: 2.0a
Max. resolution: 4k @ 60fps
Audio support:
Composite video (CVBS) 1 port
Display interfaces (LVDS, DSI...)
Camera interfaces (CSI, DVP...)
Audio output
Analog output: 1x (via 3.5mm jack)
Via HDMI:   Supported
Audio input
Line input:
Mic input:
Onboard mic:
IR receiver
Wireless connectivity
Mobile broadband:
Other I/O
ADC: x3
PWM: x1
SPI: x1
I2C: x1
UART: x2
Arduino shield support    Not compatible.
Raspberry Pi shield support    Compatible pin header
96boards compliance    None
Real time clock (RTC)
Other interfaces
HDMI: HDR10, HLG supported
2G + 2P ARM Mali-450: OpenGL ES 1.1 / 2.0; OpenVG 1.1
Multi-Media Processor Decoders:
VP9 P2 4K60, H.265 [email protected] 4K60, H.264 [email protected] 4K60, JPEG
H.265 1080P30 or 2x H.264 720P30, H.264 1080P30 or 2x H.264 720P30
U-Boot Button; ADC and UART headers
Size 85mm x 56mm x 19mm
Weight ?
Power Input voltage: 5V
Power consumption: 1A - 2.5A
PMIC/PMU (power management) ?
Lithium battery support ?
Operating temperature ?
Price (might vary over time)
Android support    Android 7.1 Nougat
Windows support    Not supported

Please note: assumes no responsibility or liability for errors or omissions in the contents of this page or any other part of this website. That said, we value your feedback and request that you email us regarding errors, omissions, or other suggestions to hackerboards [at] deviceguru [dot] com. Thanks!