Raspberry Pi Compute Module 3+

Add to comparison | Suggest corrections

  Model:  CM3+
  Manufacturer:  Raspberry Pi Foundation
  Official website:  Visit
  Category:  SoM / COM / module
  Date added/updated:  2019/02/07
  Further info:  automated Google search

Rate this board
Quality:
Value
Performance
Reliability
Documentation
Community
Sorry, no stores were provided.

  • You can try Amazon or eBay for "mainstream" single board computers, or Aliexpress, Banggood and GearBest for China-based SBCs.
  • For industrial single board computers, you can try requesting a quote either on the official website or (sometimes) on Alibaba
  • You can also suggest a (possibly international) store using the "Report mistake" feature.



Product Description

The Raspberry Pi Compute Module 3+ (CM3+) contains the guts of a Raspberry Pi 3 Model B+ -- including a 1.2GHz Broadcom BCM2837 SoC and 1GB RAM along with up to 32GB of eMMC flash -- all integrated onto a small board that fits into a standard DDR2 SODIMM connector on a carrier board. All remaining processor interfaces are available to a carrier board via the module's edge-connector, including many more GPIOs and interfaces than are supported on a standard Raspberry Pi SBC. The module is available with 32GB, 16GB, 8GB, or 0GB of on-board eMMC. Note: the price indicated below is for the 0GB eMMC "CM3+/Lite" model.


Product Specifications

Manufacturer Raspberry Pi Foundation
SoC Broadcom BCM2837B0
CPU ARM Cortex-A53 (ARMv8) (64-bit)
1.2GHz quad core
Coprocessors
GPU (graphics): VideoCore IV
MCU (real-time):
FPGA (gates):
NPU (neural):
RAM
Size: 1GB
Built-in / external:   Built-in
Type (e.g. DDR3): LPDDR2
Speed: ?
ECC support:
Internal storage
Size: 32GB
Built-in / optional:   Built-in
Type: eMMC
Removable storage
m.2 interface(s)
m.2 NVMe support
USB host ports 1x
Type: 2.0
USB OTG ports
SATA interfaces
Ethernet interfaces
Wake-on-LAN    Not supported
HDMI ports 1x
Version: 1.3a
Max. resolution: ?
Audio support:
Composite video (CVBS) 1 port
Other display interfaces
(DSI, LVDS, VGA...)
  MIPI DSI (1x 4-lane, 1x 2-lane)
Camera interfaces (CSI, DVP...)   2x
Type: MIPI CSI (1x 4-lane, 1x 2-lane)
Audio output
Analog outputs:
Via HDMI:   Supported
SPDIF:
I2S: 2x
Audio input
Line inputs:
Mic inputs:
Onboard mic:
IR receiver
Wireless connectivity
WiFi:
Bluetooth:
Broadband:
LoRa:
Other I/O
GPIO: 48x
ADC:
PWM: 2x
SPI: 2x
I2C: 2x
UART: 2x
RS232 (or 485 or 422):
Arduino shield support    No
Raspberry Pi shield support    Compatible pin header
96boards compliance    None
Real time clock (RTC)
Other features
  • Power Supply: VBAT (2.5V to 5.0V) for the SoC processor core, 3.3V for PHYs, UI and eMMC flash, 1.8V for PHYs, IO, and SDRAM, VDAC (2.8V typ.) for video composite DAC, GPIO0-27_VREF & GPIO28-45_VREF (1.8 to 3.3V) for the two GPIO banks.
  • Carrier board interface: 200-pin edge connector.
  • Available with 0 to 32GB eMMC onboard. Price shown below is for the entry-level model with 0GB eMMC.
  • This product will be supported through at least 2024.
  • Size 68 x 31 x 4mm
    Weight ?
    Power Input voltage: 2.5 - 5V
    Input current: 700mA - 1.4A
    PMIC/PMU
    (power management controllers)
    ?
    Lithium battery support ?
    Operating temperature -25 to 80°C
    Price (USD)
    (Note: likely to vary)
    $31
    Linux support    yes
    Android support    Not supported (or unknown)
    Supported Windows OSes
       Not supported (or unknown)
    Other supported OSes
       Not supported (or unknown)