Pynq-Z1

Add to comparison | Suggest corrections

  Manufacturer:  Digilent
  Official website:  Visit
  Category:  Single board computer
  Further info:  automated Google search

Rate this board
Quality:
Value
Performance
Reliability
Documentation
Community
Sorry, no stores were provided.

  • You can try Amazon or eBay for "mainstream" single board computers, or Aliexpress, Banggood and GearBest for China-based SBCs.
  • For industrial single board computers, you can try requesting a quote either on the official website or (sometimes) on Alibaba
  • You can also suggest a (possibly international) store using the "Report mistake" feature.



Product Description

The PYNQ-Z1 SBC is designed to be used with PYNQ, an open-source framework for exploiting the capabilities of Xilinx Zynq SoCs without having to design programmable logic circuits. Instead, the Zynq SoC is programmed using Python, and the code is developed and tested directly on the PYNQ-Z1.


Product Specifications

Manufacturer Digilent
SoC Xilinx ZYNQ XC7Z020
CPU ARM Cortex-A9 (32-bit)
650MHz dual-core
Coprocessors
GPU (graphics):
MCU (real-time):
FPGA (gates): XC7Z020
NPU (neural):
RAM
Size: 512MB
Built-in / external:   Built-in
Type (e.g. DDR3): DDR3
Speed: ?
ECC support:
Internal storage
Size: 16MB
Built-in / optional:   Built-in
Type: quad-SPI flash
Removable storage MicroSD card slot
m.2 interface(s)
m.2 NVMe support
USB host ports 1x
Type: 2.0
USB OTG ports
SATA interfaces
Ethernet interfaces 1x
Type: Gigabit
Wake-on-LAN    Not supported
HDMI ports 2x
Version: ?
Max. resolution: 0 @ 0fps
Audio support:
Composite video (CVBS)
Other display interfaces
(DSI, LVDS, VGA...)
Camera interfaces (CSI, DVP...)
Audio output
Analog outputs: 1x (via 3.5mm jack)
Via HDMI:   Supported
SPDIF:
I2S:
Audio input
Line inputs: 1x
Mic inputs:
Onboard mic:
IR receiver
Wireless connectivity
WiFi:
Bluetooth:
Broadband:
LoRa:
Other I/O
GPIO: 16x
ADC:
PWM:
SPI: 2x
I2C: 2x
UART:
RS232 (or 485 or 422):
Arduino shield support    Compatible pin header
Raspberry Pi shield support    No
96boards compliance    None
Real time clock (RTC)
Other features
* High-bandwidth peripheral controllers: 1G Ethernet, USB 2.0, SDIO
* Low-bandwidth peripheral controller: SPI, UART, CA N, I2C
* Programmable from JTAG, Quad-SPI flash, and microSD card
* Artix-7 family programmable logic
  -- 13,300 logic slices, each with four 6-input LUTs and 8 flip-flops
  -- 630 KB of fast block RAM
  -- 4x clock management tiles, each with a phase-locked loop (PLL) and mixed-mode clock manager (MMCM)
  -- 220 DSP slices
  -- on-chip analog-to-digital converter (XADC)
* 4x push-buttons; 2x slide switches; 4x LEDs; 2x RGB LEDs
* 2x standard Pmod ports with 16x total FPGA I/Os
* Arduino/chipKIT Shield connector...
  -- 49x FPGA I/Os
  -- 6x single-ended 0-3.3V Analog inputs to XADC
  -- 4x differential 0-1.0V Analog inputs to XADC
Size 87 x 122mm
Weight ?
Power Input voltage: 7 - 15V
Input current: ?
PMIC/PMU
(power management controllers)
?
Lithium battery support ?
Operating temperature ?
Price (USD)
(Note: likely to vary)
$199
Linux support    yes
Android support    yes
Supported Windows OSes
   Not supported (or unknown)
Other supported OSes
   Not supported (or unknown)