Intel Galileo (Gen 2)

Add to comparison | Report mistake

  Manufacturer: Intel
  Official website: Visit (new tab)
  Category:  Single board computer

Rate this board
   NewEgg | Maplin

Product Description

No description provided.

Product Specifications

Manufacturer: Intel
SoC: Intel Quark X1000
CPU: Pentium (P54C/i586) (32-bit)
400MHz single core
GPU (graphics):
MCU (real-time):
FPGA (gates):
NPU (neural):
Size 256MB
Built-in / External:   Built-in
Type (e.g. DDR3): DDR3
Speed: ?
ECC (error correcting) RAM:
Internal storage:
Size 8MB
Built-in / optional:   Built-in
Type: ?
eMMC slots:
SD card MicroSD card slot, up to 32GB
USB host ports 1 USB ports
Type: 2.0
USB OTG ports
SATA interfaces
Ethernet interfaces 1 port
Type: 10/100
Wake-on-LAN    Not supported
Composite video (CVBS)
Display interfaces (LVDS, DSI...)
Camera interfaces (CSI, DVP...)
Audio output
Analog I/O:
Audio input
Line input:
Mic input:
Onboard mic:
IR receiver
Wireless connectivity
Mobile broadband:
Other I/O
GPIO: x14
ADC: x6
PWM: x6
SPI: x1
I2C: x1
UART: x2
RS232: x1
Arduino shield support    Compatible pin header
Raspberry Pi shield support    Not compatible.
96boards compliance    None
Real time clock (RTC)
Other features
Arduino Compatible: Uno R3 / Arduino 1.0 pinout (both 3.3V or 5V Shield Support); RAM: 256MByte DDR3; 512KByte embedded SRAM; Flash Storage: 8MByte NOR Flash; 8Kbit EEPROM; LAN: 10/100 Ethernet (RJ-45 connector) with support for Power-over-Ethernet (PoE); PCI-E: Mini-PCI Express 1x Slot; JTAG: 10-pin connector; NOR Flash: 7-pin connector for ext. programmer; RTC Battery: 2-pin header; Input (DC): Power Adapter (7V - 15VDC); Development System: Arduino IDE customized for Galileo
Size 124mm x 72mm x 17mm
Weight 56g
Power Input voltage: 7V - 15V
Power consumption: 900mA - 2.1A
PMIC/PMU (pwr mgmt unit) ?
Lithium battery support Supported
Operating temperature ?
Price: (might vary over time)
Android support    Not supported
Windows support    Supported (beta)

Please note: assumes no responsibility or liability for errors or omissions in the contents of this page or any other part of this website. That said, we value your feedback and request that you email us regarding errors, omissions, or other suggestions to hackerboards [at] deviceguru [dot] com. Thanks!